Difference between revisions of "Waypoint"

From GeoWiki
Jump to: navigation, search
(More info)
 
(10 intermediate revisions by 6 users not shown)
Line 1: Line 1:
A waypoint is a single set of [[GPS]] Co-ordinates.
+
[[Image:Waypoint.jpg|thumb|left|300px|GPSr at the GZ for the Waypoint it is navigating to.]]
 +
A [[Waypoint]] is a location on Earth defined by a set of [[coordinates]].  When stored in a [[GPS receiver]], or identified on [[cache page]], a [[waypoint]] is typically referenced by a [[waypoint code]] (or [[waypoint ID]]).
  
[[Traditional Caches]] have a single waypoint - the [[geocache]].
+
In [[geocaching]], [[traditional cache]]s have a single waypoint - the location of [[cache]] (or [[ground zero]]).
  
[[Multi-caches]] have more than one [[waypoint]].
+
[[Multi-cache]]s have more than one [[waypoint]], with the final [[waypoint]] being the [[cache]].
 +
In cases where a second (or subsequent) [[waypoint]] is found by projecting a bearing and distance from a first [[waypoint]], this is refered to as a [[projected waypoint]]
 +
 
 +
[[Waypoint]]s in [[geocaching]] are typically two-dimensional, referenced by old [[latitude]] and [[longitude]] [[coordinates]].  [[Altitude]] is ignored, as [[cache]]s are typically at or near ground-level.  (This unknown dimension is exploited for sneaky effect in some caches.)
 +
 
 +
[[Category:Glossary]]

Latest revision as of 22:44, 24 June 2007

GPSr at the GZ for the Waypoint it is navigating to.

A Waypoint is a location on Earth defined by a set of coordinates. When stored in a GPS receiver, or identified on cache page, a waypoint is typically referenced by a waypoint code (or waypoint ID).

In geocaching, traditional caches have a single waypoint - the location of cache (or ground zero).

Multi-caches have more than one waypoint, with the final waypoint being the cache. In cases where a second (or subsequent) waypoint is found by projecting a bearing and distance from a first waypoint, this is refered to as a projected waypoint

Waypoints in geocaching are typically two-dimensional, referenced by old latitude and longitude coordinates. Altitude is ignored, as caches are typically at or near ground-level. (This unknown dimension is exploited for sneaky effect in some caches.)